The Kevlar fiber, which is used in Bulletproof vests, is blended into FRP Putty. This has 5 times the amount of high tension resilience as steel and can withstand bending and vibration at high levels. This helps repair the area underneath the doors.

Directions to use

1. Remove oil, dust or dirt from the area being repaired with the 150-grit sandpaper and Atelier 99 Silicone Off (sold separately).

2. Pour all of the hardener into the main agent and mix it with the included spurtle quickly. Afterward, it reacts and starts hardening.

3. Apply the mixed putty on the area being repaired with the included spatula. The putty takes about 1 hour to harden. After it hardens, make the area smooth with sandpapers (320-grit -> 600-grit) and finish up with Atelier 99 Polyester Body Putty Natural and Atelier 99 Body Paint.